12V Solar Panel 100 Watt Monocrystalline Module PV 30A Controller Boats RV Car

Description

12V 100W 30A Solar Panel
Feature
【High Efficiency】solar panels use new solar monocrystalline cells, up to 23% conversion rate, 100w solar panels are smaller, lighter and more portable
【Versatile】Supported by a wide range of mounting options including flat surface, pole and wall installation.Common applications includes RV, camper, SUV, marine, residential rooftop, remote farm, disaster relief, traffic signs, etc.
【Weather-proof】Rugged design to withstand high winds, hail and snow load.The panel and junction box are protected from common weather conditions and water splash (IP65 rating)
【Thin & Lightweight】100W solar panel weighs approximately 1lb,Thickness is 0.1in， weighs 70% less than conventional solar panels, making transportation and installation a breeze.
【Practicality】Light energy converts electricity, Practical and suitable for use in areas where electricity is not available and where the city cannot reach, such as mountains, marine, deserts, and remote areas
Specification：
100W Solar Panel
High Efficient Monocrystalline
Maximum Power: 100W
Charge Voltage: 12V
Temperature Range： -40℃ to +80℃(-40°F to +176°F)
J-Box IP Rating: IP65
Product size：11*11 Inch
Product weight：458 g/1 lb
30A Solar Panel Battery Charge Controller
Describe
The solar charge controller is a kind of intelligent, multi-purpose solar charge and discharge controller.
Solar Charge Regulator can fully meet your home Photovoltaic system (including home lighting system) requirements.
Feature
【
Upgraded solar panel controller
】 Charge controller build-in industrial micro controller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. Compatible with 12V/24V system.
【
Scope of application
】 The 12v solar charge controller is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. Dual USB output, the maximum current of 2A, to support mobile phone charging.
【
Safe to use
】Charge controllers for solar panels with Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection. 12v solar charge controller takes fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery.
【
LCD display
】Solar controller 12v with big LCD display, you can also switch modes and adjustable parameter, clearly indicate the status, suitable for home, industrial, commercial etc.
【
Notice
】 The 12 volt charge controller should connect the battery first, then the solar panel, and finally the load! Please strictly follow the above order to access, otherwise it may damage the controller or other components; the disassembly sequence is contrary to the wiring order.
Connection steps
1. Connect the battery to the charge regulator.
2. Connect the solar panels to the charge regulator.
3. Connect the consumer to the charge regulator.
NOTE: The reverse order applies when deinstalling. The wrong connection sequence will damage the controller.
Specifications
Battery voltage: 12V/24V
Charge current: 30A
Discharge current: 10A
Max Solar input: <50V
Float Charge: 13.7V (defaul,adjustable)
Discharge Stop: 10.7V (defaul,adjustable)
Discharge Reconnect: 12.6V (defaul,adjustable)
USB output: 5V/1.2A
Operating temperature: -35~+60℃
Size : 13.3* 7 * 3.5cm
Make sure the battery has sufficient voltage for the controller to recognize the battery before the first installation.
Package
Solar Panel+Controller (.95)
1 X Solar Panel
1 X Crocodile Clip
1 X Car Plugs
1 X 10 in 1 Data Cable
2 X Carabiners
4 X Suction Cup
1X 30A Solar Charge Contorller
1 ×
User Manual
30A Controller (9.95)
1X 30A Solar Charge Contorller
1 ×
User Manual
12V 100W Solar Panel
(32.95)
1 X Solar Panel
1 X Crocodile Clip
1 X Car Plugs
1 X 10 in 1 Data Cable
2 X Carabiners
4 X Suction Cup